Step-by-Step Instructions for Installing a Peep Sight

How To Install A Peep Sight

Are you looking to improve your accuracy while hunting or shooting? A peep sight can be a game-changer for your aim. But how do you install one?

Peep sights have been a popular addition to archery and firearm enthusiasts’ equipment for years. They help align the shooter’s eye with the target and improve accuracy. However, installing a peepsight can be daunting for beginners.

Installing a peep sight may seem like a complicated process, but with the right tools and knowledge, it can be done easily. In this article, we will guide you through the step-by-step process of installing a peep sight on your bow or firearm, so you can start shooting with improved precision and confidence.

What Is A Peep Sight

Before delving into the installation process, let’s first understand what a peep sight is. A peep sight is a circular device that is attached to the bowstring of a bow. It acts as a rear sight for the archer to aim more accurately at their target. It is a tool that helps archers to align their bowstring, front sight, and eye more precisely.

The Importance of a Peep Sight

A peep sight helps archers to aim more accurately by providing them with a consistent reference point. Since it’s always positioned at the same place when you draw the bowstring back, you can rely on it to help you line up your shots.

Tools Needed

Before installing a peep sight, you will need a few tools. These tools include:

  • Bow vise
  • Allen wrench set
  • Bow square
  • Peep sight

It is essential to have all the necessary tools before you start installing a peep sight to avoid any interruptions.

How To Install A Peep Sight

Step-by-Step Guide to Installing a Peep Sight

Follow these steps to install a peep sight:

  • Begin by using the bow press to relieve pressure on the bowstring.
  • Once the bowstring is relaxed, use the Allen wrenches to remove any attachments on the bowstring, such as a kisser button or nocking point.
  • Apply bowstring wax to the bowstring to prevent it from fraying during the installation process.
  • Install the peep sight onto the bowstring. It is essential to ensure that the peep sight is level with the bowstring and that the aperture is facing the archer’s eye.
  • Use the Allen wrenches to secure the peep sight onto the bowstring.
  • Reattach any accessories that you removed earlier, such as a kisser button or nocking point.
  • Finally, test the peep sight by drawing the bowstring back and ensuring that the aperture lines up with your eye.

Alternative Methods of Installing a Peep Sight

While the method detailed above is the most common way to install a peep sight, there are alternative methods. One such method involves the use of a bow square to ensure that the peep sight is installed at the correct height and angle. Another method involves using a peep sight installer tool, which uses a clamp to attach the peep sight to the bowstring.

Tips and Tricks for Installing Peep Sight

  • Be sure you are using the correct size of peep sight.
  • If you are using a bow press, make sure you consult the manufacturer’s manual before you start.
  • If you are not comfortable installing peep sight, then take it to a professional.
  • Always wear safety glasses while installing a peep sight to avoid eye injuries.

Common Mistakes to Avoid When Installing a Peep Sight

Some common mistakes that archers make when installing a peep sight include:

  • Not ensuring that the peep sight is level with the bowstring
  • Installing the peep sight too high or too low on the bowstring
  • Using too much force when tightening the peep sight onto the bowstring, can damage the bowstring.

To avoid these mistakes, it is essential to follow the installation instructions carefully and use the correct tools.


Installing a peep sight is a crucial step for any archer. It helps the archer to aim more accurately and hit their target more precisely. We hope that this guide has helped you understand how to install a peep sight.

Frequently Asked Questions (FAQs)

How do I know which size peep sight to use?

The size of your peep sight will depend on your personal preference and shooting style. It is best to try out different sizes to determine which one works best for you.

Can I install a peep sight myself?

Yes, you can install a peep sight yourself. However, if you are unsure about the process, it is best to seek professional advice.

How do I adjust the aperture size on a peep sight?

Most peep sights come with an adjustable aperture that can be resized using an Allen wrench. Start by making minor adjustments to the aperture size and testing your aim before making any significant changes.

Can I use a peep sight with a recurve bow?

Yes, you can use a peep sight with a recurve bow. However, it may require the use of additional equipment, such as a bow sight.

Can I use a peep sight with a recurve bow?

Yes, a peep sight can be used with a recurve bow. However, it may not be necessary, as some archers prefer to shoot without one.

Leave a Reply

Your email address will not be published. Required fields are marked *